The main advantages of digital devices
In recent years, analog X-ray machines have been successfully replaced by new generation digital equipment. The innovative system allows you to receive instant images on a computer, providing long-term storage of information, as well as the ability to redirect diagnostic results directly to the treating specialist.
Despite the fairly high cost of the X-ray machine, this system has many advantages:
- During diagnostics, it is possible to obtain high-quality images with subsequent processing of information on a computer.
- Modern devices make it possible to diagnose the slightest changes in the structures under study.
- If the results are controversial, the specialist enlarges the required area, studying each detail in more detail.
- Low radiation dose to the patient and medical staff.
- Faster examination due to more powerful equipment.
- The results are ready within 5 minutes, since there is no need to wait for the film to develop.
Thanks to innovative digital systems, it is possible to significantly increase the throughput of the diagnostic room, thereby increasing productivity and the number of patients received during the day without harm to the health of the physician. personnel.
Digital X-ray equipment
Digital radiography has been actively used in medicine for many years and is becoming increasingly widespread in dentistry.
Compared to traditional technology of filming and subsequent development, digital X-ray equipment has significant advantages:
- reduction of the X-ray dose by 50-70%, in some cases up to 90%
- fast processing of received data, thanks to the elimination of complex and lengthy development procedures
- storing and copying images without loss of quality and additional costs
- low cost of consumables, as well as minimal maintenance
- no chemical waste and no costs for their disposal
Digital radiography is a technology of the future that is ready now to open up new opportunities for you and significantly improve the level of services provided.
Digital panoramic X-ray device Pax-i with cephalostat Manufacturer Vatech Article PaX-i SC
RUB 1,825,390
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
EzRay Air Wall-intraoral X-ray unit, with wall mount Manufacturer Vatech Product code WEX-S300W
RUB 204,443.68
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray system Ortophos Sl 3 D 8*8 DCS Manufacturer Dentsply Sirona Article 6466580 (8*8 DCS)
RUB 5,024,081.43
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
Computer tomograph Pax-i 3D 12 x 9 with cephalostat Manufacturer Vatech Article PaX-i3D 12 x 9 +Ceph
RUB 3,979,350.20
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
Computer tomograph Pax-i 3D 12 x 9 Manufacturer Vatech Article Pax-i 3D 12 x 9
RUB 3,431,733.20
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
Portable x-ray machine EzRay Air Portable Manufacturer Vatech Article VEX-P300
RUB 204,443.68
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
Computer tomograph Pax-i 3D 15×17 with cephalostat Manufacturer Vatech Article Pax-i 3D +Ceph 15×17
RUB 6,564,102.44
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
Computer tomograph Pax-i 3D 15×17 Manufacturer Vatech Article Pax-i 3D 15×17
RUB 5,841,248
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
Digital panoramic X-ray machine Pax-i Manufacturer Vatech Article number Pax-i
RUB 1,022,218.40
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
HELIODENT PLUS - intraoral X-ray unit, with wall mounting Manufacturer Dentsply Sirona Article number 6483734
RUB 234,283.59
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray system ORTHOPHOS SL 2 D Ceph Manufacturer Dentsply Sirona Article 6467042+Ceph
RUB 3,253,938.75
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray system ORTHOPHOS SL 2 D Manufacturer Dentsply Sirona Article number 6467042
RUB 2,386,221.75
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray system Ortophos Sl 3 D 8*8 DCS Ceph Manufacturer Dentsply Sirona Article 6466580 (8*8 DCS+Ceph)
RUB 5,891,798.43
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray system Ortophos Sl 3 D 11*10 DCS Manufacturer Dentsply Sirona Article 6466580 (11*10)
RUB 5,457,939.93
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray system Ortophos Sl 3 D 11*10 DCS Ceph Manufacturer Dentsply Sirona Article 6466580 (11*10+Ceph)
RUB 6,325,656.93
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray sensor XIOS XG Supreme WI FI Manufacturer Dentsply Sirona Article number 6534338
RUB 425,181.33
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
X-ray sensor XIOS XG Supreme USB Manufacturer Dentsply Sirona Article number 6534262
RUB 364,441.14
Add to comparison Go to comparison Set aside Go to deferred
Add to cart
Radiovisiograph EzSensor Manufacturer Vatech Article No. R-USM-701
RUB 153,332.76
Add to comparison Go to comparison Set aside Go to deferred Add
to cart
Area of use of stationary equipment
The X-ray complex is primarily used for suspected diseases of the musculoskeletal system.
The main directions of the digital system are:
- X-ray examination of the chest and spinal column;
- examination of soft tissues, vascular system;
- examination of the upper and lower respiratory tract;
- contrast studies of blood vessels;
- examination of breast diseases using mammography.
The equipment is designed in such a way as to provide examination for patients with varying degrees of severity of the condition. Diagnosis is performed in different projections and body positions - sitting, lying, standing.
What influences the formation of value?
First of all, the cost of the device depends on its type - digital equipment will cost an order of magnitude more. In addition, the functionality of the device is of great importance; the more features, the higher the cost.
X-ray machines are portable (portable) and stationary. Thus, stationary devices are considered more informative, so their cost will also be higher compared to portable systems.
In any case, the cost of modern digital devices is fully justified, since innovative systems do not require clarification of the diagnosis; they quickly and efficiently display the presence or absence of a pathological process, facilitating the work of the radiologist.
The success of a diagnostic clinic and an increase in throughput completely depends on the capabilities of a stationary X-ray machine. High-quality and modern equipment is the main guarantee of the success of the diagnostic and treatment center!
X-ray machines 105 products
Portable portable x-ray machines
Non-Destructive Control LLC offers a wide range of portable portable x-ray machines for industrial x-ray inspection.
X-ray machines solve problems from quality control of welded joints of pipelines to control of connections of profile and sheet metal structures. We offer devices from both domestic and foreign manufacturers. Russian equipment, to our pride, is not inferior in quality to foreign equipment. And service is incomparable in terms of time and cost with foreign devices. Portable devices are available in two modes: pulsed and with constant voltage at the anode.
Pulse X-ray machines
Pulse X-ray machines are lightweight - the average weight of a monoblock is 7.5 kg. They cannot regulate current and voltage, so it is easy to control pulsed devices. This is both a plus and a minus at the same time. Due to the lack of adjustments, the quality of images with pulsed devices is worse than with constant voltage. In addition, pulsed X-ray machines fail more often than devices with a constant potential at the anode. However, repairing such devices is easier and faster. All pulsed X-ray machines operate in both directional and panoramic modes.
There are 5 main series of devices competing with each other on the Russian market.
Series "ARINA".
The most popular pulse devices in Russia. The line includes models of varying power and cost, available for use by any laboratory. The series is represented by the models “Arina-1” for the crawler “Sirena-5”, “Arina-3” with voltage up to 220 kV and translucency thickness up to 30 mm, “Arina-7” with voltage up to 250 kV and translucency thickness up to 40 mm ., "Arina-9" with a voltage of up to 300 kV and an automatic shutdown function in case of overheating (continuous operation time up to 30 minutes) with a translucency thickness of up to 50 mm.
The models “Arina-5” with a voltage of 250 kV and the possibility of transillumination up to 60 mm have been discontinued. “Arina-6” is the only device in the line with constant voltage, “Arina-02M” with a maximum translucency thickness of 25 mm.
Series "PAMIR".
Two modifications of improved popular models of the ARINA series. The continuous operation time has been increased from 15 to 30 minutes, the weight of the PAMIR-200 device has been reduced to 5 kg, the battery type has been reduced to 12 V. The PAMIR-200 is translucent to 40 mm. at a voltage of 200 kV, “PAMIR-300” up to 50 mm. with a voltage of 300 kV on the tube. In the third quarter of 2015, production of an improved modification of PAMIR-300 - the PARMA X-ray machine - will begin. The device has no cables, switches on remotely, and the battery life is increased to 1 hour.
Series "ARION".
The tubes of this series of devices are manufactured gas-filled, in contrast to the oil filling of other series. Due to the gas-filled environment, the service life of the devices increases. However, repair and maintenance are more labor-intensive than oil pipes. The devices have a shutdown relay when the tube begins to overheat. The number in the name of the device indicates the voltage on the tube. The devices in the series are represented by the models “ARION-150” with a transillumination thickness of up to 30 mm, “ARION-200” with a thickness of up to 40 mm, “ARION-250” with a thickness of up to 50 mm, “ARION-300” with a thickness of up to 60 mm, “ARION-400” with a thickness of up to 80 mm and “ARION-600” with a thickness of up to 110 mm.
Series "MONOSCAN".
Manufactured in the United States of America. The line is represented by 4 models. "MONOSCAN-1" with a voltage of 150 kV and a transillumination thickness of up to 15 mm. without intensifying screens, “MONOSCAN-2” with a voltage of 150 kV and a transillumination thickness of up to 20 mm. without intensifying screens, “MONOSCAN-3” with a voltage of 270 kV and a transillumination thickness of up to 35 mm. without intensifying screens, “MONOSCAN-4” with a voltage of 400 kV and a transillumination thickness of up to 55 mm. without intensifying screens.
X-ray machine "SHMEL-250".
A popular domestic device with a voltage of 250 kV, a focal spot of 2 mm. and a maximum transillumination thickness of up to 54 mm.
X-ray machines with constant potential
Constant potential X-ray machines have a constant voltage across the X-ray tube. The images from this type of device have higher contrast and higher resolution, because the voltage can be adjusted for a specific thickness. Permanent X-ray machines are more reliable and durable than pulsed ones. Repairing X-ray machines with constant voltage is more difficult and longer than with pulsed ones. When purchasing, you need to choose a directional or panoramic device, depending on the task at hand.
The choice of permanent X-ray machines is twice as wide as that of pulsed ones.
Series "SBK".
Reliable devices with automatic training function and enhanced protection of the X-ray tube from impacts. The series is represented by the models “0.3 SBK-150” with a voltage of 150 kV and a translucency thickness of up to 28 mm, “0.3 SBK-160” with a voltage of 160 kV and a translucency thickness of up to 32 mm., “0.3 SBK-160S” northern version with operating temperature range from +40 to -40°С, “0.3 SBK-180SP” northern panoramic version, “CXT-200-48-N” for crawlers.
Series "RPD".
Well-known X-ray devices on the market, loved by many flaw detectors. They have various modifications (directional, panoramic, north, mini), which allows them to be used in a wide variety of conditions and control tasks. The main models of devices in the series: for operation in non-stationary conditions with a voltage of 250 kV "RPD-250S", with a voltage of 200 kV "RPD-200", with a voltage of 180 kV "RPD 180", with a voltage of 150 kV "RPD-150" and its northern version "RPD-150S", panoramic device "RPD-200P" and device for working in the Far North "RPD-200S".
Series "MARCH".
X-ray machines with a thermionic tube. Automatic training mode of the device. The series includes two modifications: “MART-200” with the ability to work in a directional and panoramic way, voltage 105-200 kV and a transillumination thickness of up to 40 mm, “MART-250” with a directional tube, voltage of 130-250 kV and a maximum translucency thickness of up to 50 mm.
Series "RADON".
A new version of the devices of the Ra series (a constant potential device with a voltage of 190 kV), Ratmir-250 (a radiographic device with a voltage of 250 kV), and the Ratmir-250P model (a device for panoramic photography with a voltage of 250 kV). The RADON series is represented by the RADON-200 and RADON-250 models with panoramic versions RADON-200P and RADON-250P.
RayCraft series.
The devices use ceramic and glass flasks. Gas insulation of the high-voltage part of the SF6 generator. Forced air cooling. The RayCraft series of devices has a wide range of models with a voltage range from 100 to 300 kV.
Eresco series.
X-ray machines of constant potential with a metal-ceramic tube of the Eresco series with voltage up to 300 kV. Manufacturer General Electrics.
ICM series.
Allows inspection of welds along the entire diameter of the tank bottom due to the off-center position of the focus. The line of ICM devices of the SITE X modification has a voltage from 70 to 180 kV. The panoramic model of the ICM SITE-X C3205 X-ray machine allows for high-quality inspection of pipelines and vessels in a wide range of thicknesses.
Series "BALTEAU".
Belgian X-ray machines. "BALTEAU" produces devices both for manual control and for use in crawlers.
Series "SMART".
Manufactured by YXLON International. Devices of the “SMART” series illuminate thicknesses from 27 to 54 mm with lead screens.
Series XXG and XXGH.
In the XXG line, these are directional models with a transparency thickness of 60 mm, and XXGH panoramic models with a thickness of up to 55 mm.
MST series.
A line of devices in the name of which a number indicates the voltage value on the tube. “MST-160” with a transmission thickness of up to 40 mm, “MST-200” with a transmission thickness of up to 52 mm, “MST-225” with a transmission thickness of up to 67 mm.
Stationary X-ray machines
In stationary conditions, stationary X-ray devices are used for in-line or automated control. Depending on the object being monitored, the X-ray system can be designed individually for the task at hand. Stationary X-ray systems can use automated product feeding and sorting lines. X-ray tubes in such systems always have a constant voltage at the anode. To implement a stationary X-ray machine or system, it is necessary to design the complex and install it at the site where the system is used.
A stationary X-ray machine must be selected based on power, operating and maintenance costs.
IZOVOLT systems.
X-ray systems manufactured by General Electrics. "Izovolt Titan E" are reliable X-ray machines with a cermet tube.
Bosello systems.
Stationary X-ray machines with Varian or Comet tubes. The series consists of a line of devices “Bosello-160” with a voltage of 160 kV, “Bosello-225” with a voltage of 225 kV, “Bosello-320” with a voltage of 320 kV, “Bosello-350” with a voltage of 350 kV, “Bosello-450” with voltage 450 kV.
Stationary X-ray machines of the "Extravolt" series.
They have a wide range of applications, since at any time they allow you to install the desired X-ray tube that meets the requirements for the size and power of the focusing spot. "Extravolt-225" - voltage 225 kV, transmission depth up to 64 mm.
Stationary X-ray machines of the Bastion series.
Domestic X-ray machines widely used in industry.
Stationary X-ray machines of the “Ruslan” series.
The devices use Comet metal-ceramic tubes and Spellman generators.
Buy an X-ray machine from Non-Destructive Control LLC
We will help you choose the right X-ray machine, taking into account your financial capabilities and monitoring tasks. Over 27 years, we have accumulated extensive experience in the sale of such equipment and offer exclusively reliable, proven and effective X-ray machines from leading Russian and foreign manufacturers.
Our advantages
— Large warehouse of equipment, spare parts and consumables for X-ray testing.
— We have the most popular models of X-ray machines.
— Own certified center for maintenance and repair of X-ray machines. Thanks to the availability of all the necessary branded spare parts, service work can be carried out in a short time.
— The company employs engineers specializing in “Instruments and methods of quality control and diagnostics” with experience.
— More than 4,000 clients.
The company has official distributor certificates for all X-ray machines. Our regular customers of X-ray machines are the largest construction, defense and metallurgical enterprises, as well as companies in the oil and gas sector.
All supplied X-ray machines are provided with a manufacturer's warranty. At the client's request, it is possible to deliver equipment throughout Russia by any type of transport. We deliver X-ray machines to the CIS countries and the customs union (Kazakhstan, Belarus, Ukraine, Tajikistan, the Republic of Moldova, Kyrgyzstan).
Consultation on the selection and operation of X-ray machines +7 343 227-333-7 in Yekaterinburg and Moscow.
Email
Found an error in the text? Select it and press Ctrl + Enter to help us fix it. Go back to the main page
